PFERD Poliflex Mounted Point ZY 1010 3S AR 120GR
Description
Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances. They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications.
Poliflex fine grinding tools with the GR bond are manufactured with pink aluminium oxide. The GR bond is a soft elastomer-based bond. Suitable for use on surfaces.
Mounted grinding wheel in cylindrical shape, for fine grinding of small surfaces.
Technical information
Poliflex grinding point cylindrical shape dia. 8x12 mm shank dia. 3 mm bond GR A220
- Abrasive - Aluminium oxide A
- Bond - GR
- Dia. external - 10 mm
- Dia. shank - 3 mm
- Grit size - 220
- Length, shank - 30
- Max. RPM - 35800 RPM
- RPM, optimum - 24000 RPM
- Shape - Cylinders
- Width - 10 mm
Advantages
- Produces very good surface quality.
- High economic efficiency thanks to long tool life and high stock removal rate.
- Maximum working convenience through precise concentricity.
- Produces a fine, shiny surface finish.
- Soft grinding thanks to soft, elastic bond.
Recommendations for use
- Depending on the intended use, profile using a dressing diamond or ceramic dressing stone at a low rotational speed.
- For the best results, use at a recommended cutting speed of 10–12 m/s.
Safety notes
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
- The clamping length of the shank has to be at least 10 mm.
Materials that can be worked
- Cast steel
- Cobalt-based alloys
- Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
- Nickel-based alloys (e.g. Inconell and Hastelloy)
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
Applications
- Step-by-step fine grinding
Drive types
- Flexible shaft drive
- Straight grinder