PFERD TC Burr Set 6/10-01 (10) MX NCC

Description

NEW PFERD-COMBICUT tungsten carbide burrs with the cut MX NCC were designed especially for general use. They have a good stock removal rate when used on various different materials.

The 6/10-01 MX NCC set contains the ten most common burrs in the general MX NCC cut. The robust round plastic box with screw-on top protects the tools from dirt and damage.

This set contains:

ZYA 0616 MX NCC
ZYA 1225 MX NCC
KUD 1009 MX NCC
KUD 1210 MX NCC
WRC 0616 MX NCC
WRC 1225 MX NCC
SPG 0618 MX NCC
SPG 1225 MX NCC
RBF 0618 MX NCC
RBF 1225 MX NCC

Advantages

• Good stock removal rate and tool life.
• Cost-effective stock removal when used on a wide variety of materials.
• The highly accurate concentricity enables impact­free working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• Use the highest rotational speeds possible. In this respect, please observe our recommended rotational speeds/cutting speeds.
• The contact area between the burr and the workpiece must not exceed 30 % of the total burr surface.

Materials that can be worked

• Bronze
• Case-hardened steels
• Cast iron
• Cast steel
• Cobalt-based alloys
• Fibre-reinforced thermosetting plastics (GRP, CRP)
• Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %
• Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %
• Grey/nodular cast iron (GG/GJL, GGG/GJS)
• Hard aluminium alloys
• Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
• Hard non-ferrous metal
• Hardwood
• High-temperature-resistant materials
• Nickel-based alloys (e.g. Inconell and Hastelloy)
• Other
• Other non-ferrous metals
• Plastics
• Stainless steel (INOX)
• Steel
• Steel, cast steel
• Steel materials with a hardness > 54 HRC
• Steels over 700 N/mm² (> 220 HB)
• Steels up to 1,200 N/mm² (< 38 HRC)
• Steels up to 700 N/mm² (< 220 HB)
• Thermoplastics
• Titanium
• Titanium alloys
• Tool steels
• White annealed cast iron (GTW, GJMW)
• Wood

Applications

• Cutting out holes
• Deburring
• Milling
• Working on edges
• Work on weld seams

Drive types

• Flexible shaft drive
• Robot
• Straight grinder