PFERD TC Burr Set 6/5-12 (5) MX NCC

Description

NEW PFERD-COMBICUT tungsten carbide burrs with the cut MX NCC were designed especially for general use. They have a good stock removal rate when used on various different materials.

The 6/5-12 MX NCC set contains the five most common shapes with a burr diameter of 12 mm in the general MX NCC cut. The robust round plastic box with screw-on top protects the tools against dirt and damage.

This set contains:

ZYA 0616/6 MX NCC
ZYA 1225/6 MX NCC
KUD 1009/6 NX NCC
KUD 1210/6 MX NCC
WRC 0616/6 MX NCC
WRC 1225/6 MX NCC
SPG 0618/6 MX NCC
SPG 1225/6 MX NCC
RBF 0618/6 MX NCC
RBF 1225/6 MX NCC 

Advantages

• Good stock removal rate and tool life.
• Cost-effective stock removal when used on a wide variety of materials.
• The highly accurate concentricity enables impact­free working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• Use the highest rotational speeds possible. In this respect, please observe our recommended rotational speeds/cutting speeds.
• The contact area between the burr and the workpiece must not exceed 30 % of the total burr surface.

Materials that can be worked

• Bronze
• Case-hardened steels
• Cast iron
• Cast steel
• Cobalt-based alloys
• Fibre-reinforced thermosetting plastics (GRP, CRP)
• Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %
• Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %
• Grey/nodular cast iron (GG/GJL, GGG/GJS)
• Hard aluminium alloys
• Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
• Hard non-ferrous metal
• Hardwood
• High-temperature-resistant materials
• Nickel-based alloys (e.g. Inconell and Hastelloy)
• Other
• Other non-ferrous metals
• Plastics
• Stainless steel (INOX)
• Steel
• Steel, cast steel
• Steel materials with a hardness > 54 HRC
• Steels over 700 N/mm² (> 220 HB)
• Steels up to 1,200 N/mm² (< 38 HRC)
• Steels up to 700 N/mm² (< 220 HB)
• Thermoplastics
• Titanium
• Titanium alloys
• Tool steels
• White annealed cast iron (GTW, GJMW)
• Wood

Applications

• Cutting out holes
• Deburring
• Milling
• Working on edges
• Work on weld seams

Drive types

• Flexible shaft drive
• Robot
• Straight grinder